(951) 342-3100 sales@blacoh.com

Applications

Click on a job story below to read more.
Power Plant

Power Plant

Problem: A 300 megawatt power plant required a chemical feed system to supply hydrazine to a boiler. The hydrazine acts as an oxygen scavenger, and must be delivered in a precise and consistent quantity. While metering pumps can deliver chemicals in precise amounts, their reciprocating action will not allow delivery in a smooth and consistent flow.

Waste Liquids

Waste Liquids

Problem: A large manufacturing plant located in Japan uses air operated high pressure injection pumps throughout their plant to pump out waste liquids from reactor vessels. The reciprocating action of the pumps creates a pulsating flow which vibrates the plumbing, producing loud noise resulting in worker complaints and possible safety issues.

Descaling

Descaling

Problem: Rocky Mountain Steel Mills in Pueblo, CO uses two Myers/Aplex MA-240M quintuplex 200 HP plunger pumps to descale the raw material before it is sent through the forming rollers that create the final product. Each of these pumps produces 100 GPM at 2,200 psi. The reciprocating action and high pressure created by these pumps causes severe shaking of the pipes, valves, and pipe supports in the system. More critical to the operation, the pulsating flow can cause erratic descaling of the raw material. This erratic descaling can cause damage to the form rollers and can make it difficult for the steel mill to achieve consistent quality in their final product. This style of pump also requires a smooth flow of fluid to the inlet to work properly.

Hydrochloric Acid

Hydrochloric Acid

Problem: Using a reciprocating diaphragm pump creates a turbulent product flow which causes excess vapors and product aeration.

Pulp & Paper

Pulp & Paper

Problem: A major pulp and paper mill in the Northwest used AODD unloading pumps. The reciprocating action of these air operated pumps created violent pulsations that caused both pipe stress and mounting fatigue. In fact, these pulsations often caused the pumps to be pulled from their cement foundations. This created significant downtime, costly foundation repair, environmental hazards, and a dangerous working environment.

Submarine Bilge

Submarine Bilge

Problem: The Australian Submarine Corp (ASC) uses a 32mm peristaltic hose pump in Collins Class Submarines to transfer oily contaminated seawater from the bilge to the waste tank. The peristaltic hose pump is perfectly suited to the duty because the pump is capable of self-priming, dry running indefinitely, and can handle sludge-type materials that could be encountered in the bilge. The overall physical size of the pump coupled with the cramped internal confines of the submarine resulted in the suction and discharge pipe work being considerably twisted; incorporating many bends and valves. The pulsed flow action caused the acceleration head of the pump to sharply increase and markedly decrease hose life to the extent that offshore trials were lasting less than a week.

APPLICATIONS
View All Power Plant Chicken Plant Oil & Gas Drilling Hazardous Waste Filter Press Centrifugal Pump Startup Chemical Feed Cleaning Products Waste Liquids Decontamination Descaling Paper Industry Diaphragm Life Pharmaceutical Solvent Drum Filling Line Chemical Transfer Deep Well Injection Coating Filtration Line Hydrochloric Acid Tank Truck Pharmaceutical Pulp & Paper Rocket Propellant Sewage Treatment Pump Startup & Shutdown Submarine Bilge Sump Storm Water Water Supply Waste Water